Venza FWD L4-2.7L (1AR-FE) (2009)
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (POWER SOURCE TERMINAL)
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (GROUND TERMINAL)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (GROUND TERMINAL)
OK -- REPLACE POWER MANAGEMENT CONTROL ECU
Power Steering ECU Communication Stop Mode
NETWORKING: CAN COMMUNICATION SYSTEM: Power Steering ECU Communication Stop Mode
Power Steering ECU Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM