Venza FWD L4-2.7L (1AR-FE) (2009)
![background image](/toyota/venza_fwd/l4-2.7l_(1ar-fe)/Page-982072.png)
(a) Turn the ignition switch off.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (GROUND CIRCUIT)
OK -- REPLACE BRAKE ACTUATOR (SKID CONTROL ECU)
Steering Angle Sensor Communication Stop Mode
NETWORKING: CAN COMMUNICATION SYSTEM: Steering Angle Sensor Communication Stop Mode
Steering Angle Sensor Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE: