Venza FWD L4-2.7L (1AR-FE) (2009)
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result:
C -- CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 1 JUNCTION CONNECTOR - ECM)
B -- CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 1 JUNCTION CONNECTOR - SKID CONTROL ECU)
A -- Continue to next step.
3. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 1 JUNCTION CONNECTOR)
(a) Disconnect the CAN No. 1 junction connector (D56).