Venza FWD L4-2.7L (1AR-FE) (2009)
Accelerator Pedal: Testing and Inspection
1AR-FE ENGINE CONTROL: ACCELERATOR PEDAL: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Engine / Data List / Accel Sensor Out No. 1 and Accel Sensor Out No. 2.
(e) Read the values displayed on the Techstream.
Standard Voltage:
If the result is not as specified, check the accelerator pedal sensor assembly, wire harness or ECM.