Venza FWD L4-2.7L (1AR-FE) (2009)
Variable Induction Control Actuator: Service and Repair
Removal
1AR-FE INTAKE / EXHAUST: INTAKE AIR CONTROL VALVE ACTUATOR (for TCV): REMOVAL
REMOVAL
1. REMOVE INTAKE MANIFOLD
(a) Remove the intake manifold See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal.
2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR (for TCV)
(a) Remove the 2 bolts, intake air control valve actuator and gasket from the intake manifold.
NOTICE:
-
Make sure that foreign matter, such as water, oil, sand and iron particles, does not enter the gear chamber or actuator at the locations
marked by the circles in the illustration.
-
Do not loosen or remove the bolt and 2 nuts shown in the illustration.