Venza FWD L4-2.7L (1AR-FE) (2009)
Crankshaft Position Sensor: Testing and Inspection
1AR-FE ENGINE CONTROL: CRANKSHAFT POSITION SENSOR: INSPECTION
INSPECTION
1. INSPECT CRANKSHAFT POSITION SENSOR
Text in Illustration
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
HINT: In the table above, the terms "Cold" and "Hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50°C (14 to
122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).
If the result is not as specified, replace the crankshaft position sensor.