Venza FWD L4-2.7L (1AR-FE) (2009)
Neutral Safety Switch: Initial Inspection and Diagnostic Overview
U760E AUTOMATIC TRANSMISSION / TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION
(a) Apply the parking brake.
(b) Turn the ignition switch to ON.
(c) Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in any other position.
(d) Check that the back-up light comes on when the shift lever is moved to R, but the light does not operate in any other position. If the operation
cannot be done as specified, check the park/neutral position switch for continuity.