Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-1495002.png)
4. INSPECT GENERATOR ROTOR ASSEMBLY
(a) Check that the generator rotor bearing is not rough or worn.
If the result is not as specified, replace the generator rotor assembly.
(b) Check the rotor for an open circuit.
Text in Illustration
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the generator rotor assembly.
(c) Check if the rotor is grounded.
Text in Illustration
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
