Venza FWD L4-2.7L (1AR-FE) (2009)
(a) Using a screwdriver, disengage the 2 claws and remove the center power point socket assembly as shown in the illustration.
Text in Illustration
HINT: Tape the screwdriver tip before use.
6. REMOVE CENTER POWER OUTLET SOCKET COVER
(a) Disengage the 2 claws and remove the center power outlet socket cover.
Installation
POWER OUTLETS (INT): CENTER POWER OUTLET SOCKET: INSTALLATION
INSTALLATION
1. INSTALL CENTER POWER OUTLET SOCKET COVER
(a) Engage the 2 claws to install the center power outlet socket cover.
2. INSTALL CENTER POWER POINT SOCKET ASSEMBLY
(a) Engage the 2 claws to install the center power point socket assembly as shown in the illustration.
3. INSTALL CONSOLE BOX ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
4. INSTALL NO. 2 CONSOLE BOX CARPET See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Installation
5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System) See: Body and Frame/Interior Moulding / Trim/Dashboard /