Venza FWD L4-2.7L (1AR-FE) (2009)
Thread diameter: 12.0 mm (0.472 in.)
Thread pitch: 1.5 mm (0.0591 in.)
HINT: The thickness of the washer is preferably 5 mm (0.197 in.) or more.
(d) Using a brass bar or an equivalent tool to hold the front axle hub, install the front axle hub bolt by tightening the nut.
Text in Illustration
NOTICE:
-
Install the nuts to prevent damage to the front axle hub bolts.
-
Do not damage the threads of the front axle hub bolts.
(e) Remove the 3 nuts and washer from the 3 front axle hub bolts.
6. INSTALL FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Front Brake/Installation
7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY
(a) Install the front disc brake caliper assembly to the steering knuckle with the 2 bolts.
Torque: 104 Nm (1060 kgf-cm, 77ft-lbf)
NOTICE: Do not twist the brake hose when installing the front disc brake caliper assembly.
8. INSTALL FRONT WHEEL
Torque: 103 Nm (1050 kgf-cm, 76ft-lbf)