Venza FWD L4-2.7L (1AR-FE) (2009)
U760E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: REASSEMBLY
REASSEMBLY
1. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
(a) Engage the 3 claws to install the shift lock control ECU sub-assembly.
(b) Connect the connector.
2. INSTALL LOWER POSITION INDICATOR HOUSING
(a) Put the guide in position and engage the 2 claws to install the lower position indicator housing to the shift lock control unit assembly.
Test in Illustration
NOTICE: Make sure that the claws are firmly engaged.
3. INSTALL NO. 2 POSITION INDICATOR SLIDE COVER
(a) Install the No. 2 position indicator slide cover to the position indicator slide cover.
4. INSTALL POSITION INDICATOR SLIDE COVER