Venza FWD L4-2.7L (1AR-FE) (2009)
(c) Pass a piano wire between the interior vehicle body and glass from the interior as shown in the illustration.
HINT: Do not allow the piano wire to interfere with the clips.
(d) Tie both wire ends to wooden blocks or similar objects that can serve as handles.
NOTICE: When separating the front side fix window assembly from the vehicle, be careful not to damage the paint or interior and exterior
ornaments.
(e) Cut off the adhesive by pulling the piano wire around the front side fix window assembly.
NOTICE: Leave as much adhesive on the vehicle body as possible when cutting through the adhesive.
(f) Disengage the 3 clips.
(g) Using suction cups, remove the glass.
NOTICE: Be careful not to drop the glass.
6. CLEAN VEHICLE BODY
(a) Clean and shape the contact surfaces of the vehicle body.
Text in Illustration
(1) Using a knife, cut away excess adhesive on the contact surfaces of the vehicle body as shown in the illustration.
NOTICE: Be careful not to damage the vehicle body.
HINT: Leave as much adhesive on the vehicle body as possible.