Venza FWD L4-2.7L (1AR-FE) (2009)
1. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY
(a) Using a T30 "TORX" socket wrench, install the windshield wiper motor assembly with the 2 bolts.
Torque: 7.5 Nm (76 kgf-cm, 66in-lbf)
(b) Apply MP grease to the crank arm pivot of the windshield wiper motor assembly.
(c) Install the windshield wiper link rod to the crank arm pivot of the windshield wiper motor assembly.
2. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Install the windshield wiper motor and link assembly with the 3 bolts as shown in the illustration.
Torque: 7.0 Nm (71 kgf-cm, 62in-lbf)
(b) Connect the connector.
3. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY