Venza FWD V6-3.5L (2GR-FE) (2010)
![background image](/toyota/venza_fwd/v6-3.5l_(2gr-fe)/Page-2483001.png)
Mud Flap: Service and Repair
Removal
EXTERIOR PANELS / TRIM: SIDE MUDGUARD: REMOVAL
HINT
When removing the mouldings, heat the vehicle body and mouldings using a heat light.
Heating Temperature
NOTICE:
Do not heat the vehicle body or mouldings excessively.
1. REMOVE FRONT FENDER OUTSIDE MOULDING
(a) Remove the screw.
(b) Disengage the 2 clips and remove the front fender outside moulding.
(c) Remove the 2 clips (No. 1 outside moulding clip) from the front fender outside moulding.
2. REMOVE FRONT DOOR OUTSIDE MOULDING
(a) Put protective tape around the front door outside moulding.
Text in Illustration
(b) Remove the hole plug and nut.