Venza FWD V6-3.5L (2GR-FE) (2010)
(d) Remove the 5 camshaft bearing caps.
45. REMOVE CAMSHAFT
(a) Remove the camshaft.
46. REMOVE NO. 2 CAMSHAFT
(a) Remove the No. 2 camshaft.
47. REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY RH
(a) Remove the camshaft housing sub-assembly RH by prying between the cylinder head and camshaft housing sub-assembly RH with a
screwdriver.
Text in Illustration
NOTICE:
Be careful not to damage the contact surfaces of the cylinder head and camshaft housing sub-assembly RH.
HINT
Tape the screwdriver tip before use.
48. REMOVE CAMSHAFT TIMING GEARS AND NO. 2 CHAIN (for Bank 2)
(a) While pushing down the No. 3 chain tensioner assembly, insert a pin of 1.0 mm (0.0394 in.) diameter into the hole to hold the No. 3 chain
tensioner assembly.