Venza FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(b) Apply seal packing in a continuous line as shown in the illustration.
Seal packing:
Toyota Genuine Seal Packing Black, Three Bond 1207B or equivalent
Seal diameter:
3.5 to 4.5 mm (0.138 to 0.177 in.)
NOTICE:
*
Remove any oil from the contact surface.
*
Install the camshaft housing sub-assembly RH within 3 minutes.
*
Do not start the engine for at least 2 hours after installing.
(c) Install the camshaft housing sub-assembly RH and tighten the 12 bolts in the order shown in the illustration.
Torque : 28 Nm (286 kgf-cm, 21 ft-lbf)