Venza FWD V6-3.5L (2GR-FE) (2010)
Power Distribution Module: Service and Repair
Removal
POWER DISTRIBUTION: POWER MANAGEMENT CONTROL ECU: REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Removal
3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
5. REMOVE POWER MANAGEMENT CONTROL ECU
(a) Disconnect the 2 connectors.
(b) Remove the 2 nuts and the power management control ECU.