toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3171 > < Initial Inspection and Diagnostic Overview|Page 3169
Page 66
background image

NG --  REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CAN NO. 2 JUNCTION CONNECTOR - CAN NO.
1 JUNCTION CONNECTOR)
OK -- Continue to next step.

5. CHECK FOR SHORT TO +B IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Initial Inspection and Diagnostic Overview|Page 3171 > < Initial Inspection and Diagnostic Overview|Page 3169