Venza FWD V6-3.5L (2GR-FE) (2010)
(b) Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner
connector as shown in the illustration.
HINT
Tape the screwdriver tip before use.
(c) Remove the bolt.
(d) Disengage the 2 guides and remove the front seat outer belt assembly.
11. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
(a) Remove the 2 bolts.
(b) Disengage the guide and remove the front shoulder belt anchor adjuster assembly.
Installation
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: INSTALLATION
1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
(a) Engage the adjuster positioning hole with the guide and install the front shoulder belt anchor adjuster assembly with the 2 bolts.