Venza FWD V6-3.5L (2GR-FE) (2010)
/Page-2015012.png)
(c) Deploy the front seat outer belt pretensioner.
(1) Confirm that no one is inside the vehicle or within a 10 m (33 ft.) radius of the vehicle.
(2) Connect the red clip of SST to a battery positive (+) terminal and the black clip to a negative (-) terminal.
(3) Press the SST deployment switch to deploy the front seat outer belt pretensioner.
HINT
The seat belt pretensioner will deploy at the same time as the SST LED illuminates.
(d) Dispose of the front seat outer belt assembly.
(1) Remove the front seat outer belt assembly and SST.
(2) Dispose of the front seat outer belt assembly in accordance with local regulations.
CAUTION:
*
The outer belt becomes very hot when the front seat outer belt pretensioner is deployed, so leave it untouched for at least 30
minutes after it has been deployed.
*
Use gloves and safety glasses when handling an outer belt with a pretensioner that has been deployed.
*
Always wash your hands with water after completing the operation.
*
Do not apply water, etc. to a front seat outer belt assembly with a pretensioner that has been deployed.
HINT
When scrapping the vehicle, deploy the front seat outer belt pretensioners, and then scrap the vehicle with the deployed outer belt
installed.
2. DISPOSE OF FRONT SEAT OUTER BELT ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)
NOTICE:
*
Never dispose of a front seat outer belt assembly with a pretensioner that has not been deployed.
*
The seat belt pretensioner produces an exploding sound when it deploys, so perform the operation outdoors where it will not
disturb local residents.
*
When deploying a front seat outer belt (with a seat belt pretensioner), perform the operation at least 10 m (33 ft.) away from the
front seat outer belt.
*
Use gloves and safety glasses when handling a front seat outer belt with a deployed pretensioner.
*
Always wash your hands with water after completing the operation.
*
Do not apply water, etc. to a front seat outer belt with a deployed pretensioner.
*
When disposing of a pretensioner equipped front seat outer belt, never deploy the belt in the customer's vehicle.
*
Be sure to follow the procedure listed below when deploying the seat belt pretensioner.
(a) Check the function of SST.
SST : 09082-00700
CAUTION: