Venza FWD V6-3.5L (2GR-FE) (2010)
![background image](/toyota/venza_fwd/v6-3.5l_(2gr-fe)/Page-485004.png)
Remove the blown fuse and disconnect all loads of the fuse.
Connect a test light in place of the fuse.
Establish conditions in which the test light comes on.
Example:
-
[A] - Ignition SW on
-
[B] - Ignition SW and SW1 on
-
[C] - Ignition SW, SW1 and Relay on (Connect the Relay) and SW2 off (or Disconnect SW2)
Disconnect and reconnect the connectors while watching the test light.