Venza FWD V6-3.5L (2GR-FE) (2010)
(g) Connect the transmission control cable to the control shaft lever with the nut.
Torque : 13 Nm (130 kgf-cm, 9 ft-lbf)
2. INSTALL AIR CLEANER BRACKET
(a) Install the air cleaner bracket with the 3 bolts.
Torque : 7.8 Nm (80 kgf-cm, 69 in-lbf)
(b) Install the wire harness clamp.
3. INSTALL AIR CLEANER CASE See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
4. INSTALL AIR CLEANER CAP WITH HOSE See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
5. INSTALL INLET NO. 2 AIR CLEANER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
6. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
7. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION See: Testing and Inspection/On-Vehicle Inspection
8. INSPECT SHIFT LEVER POSITION See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shift Linkage/Shift
Cable/Adjustments
9. ADJUST SHIFT LEVER POSITION See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shift Linkage/Shift
Cable/Adjustments