Venza FWD V6-3.5L (2GR-FE) (2010)
09951-00340
SST : 09950-70010
09951-07100
HINT
*
Install SST as shown in the illustration.
*
To prevent the rear suspension member sub-assembly from falling after removing the rear suspension member body mounting
front cushion LH, support the rear suspension member sub-assembly using your hands and body while pressing.
15. REMOVE REAR SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION RH
HINT
Perform the same procedure as the LH side.
16. REMOVE REAR SUSPENSION MEMBER BODY MOUNTING REAR CUSHION (for LH Side)
(a) Using SST and a press, remove the rear suspension member body mounting rear cushion from the rear suspension member sub-assembly.
SST : 09527-17011
SST : 09950-60010
09951-00340
SST : 09950-70010
09951-07100
HINT
*
Install SST as shown in the illustration.
*
To prevent the rear suspension member sub-assembly from falling after removing the rear suspension member body mounting
rear cushion, support the rear suspension member sub-assembly using your hands and body while pressing.
17. REMOVE REAR SUSPENSION MEMBER BODY MOUNTING REAR CUSHION (for RH Side)
HINT
Perform the same procedure as the LH side.
18. REMOVE HOLE PLUG
(a) Remove the 3 hole plugs from the rear suspension member sub-assembly.
HINT
There are 2 sizes of the hole plugs.