Venza FWD V6-3.5L (2GR-FE) (2010)
![background image](/toyota/venza_fwd/v6-3.5l_(2gr-fe)/Page-1770004.png)
SST : 09502-12010
SST : 09515-30010
SST : 09950-60020
09951-00890
SST : 09950-70010
09951-07100
HINT
Slowly press in the mounting cushion.
(c) While observing from the side, press in the rear suspension member body mounting rear cushion (LH side) until there is no clearance between
the rear suspension member body mounting rear cushion (LH side) and the rear suspension member sub-assembly as shown in the illustration.
NOTICE:
Do not press the rear suspension member excessively, or it will easily deform.
7. INSTALL REAR SUSPENSION MEMBER BODY MOUNTING REAR CUSHION (for RH Side)
HINT
Perform the same procedure as the LH side.
8. INSTALL REAR SUSPENSION MEMBER DAMPER (for 1AR-FE)
(a) Install the rear suspension member damper to the rear suspension member with the 2 bolts.