Yaris L4-1.5L (1NZ-FE) (2007)
1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY
a. Using an air riveter or hand riveter, install the front No. 1 speaker assembly onto the front door panel with 3 new strike rivets.
HINT: Install the new strike rivets in the order shown in the illustration.
NOTE:
-
Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.
-
Confirm that the rivets are seated properly against the speaker.
-
Do not tilt the riveter when installing the rivet onto the speaker.
-
Do not leave any space between the rivet head and speaker.