Yaris L4-1.5L (1NZ-FE) (2007)
a. Clean the attachment surface.
1. Using an infrared light, heat the double-sided adhesive tape remaining on the luggage compartment door panel.
HINT: Heat at 40 to 60° C (104 to 140° F) for 1 to 2 minutes.
2. Using a shop rag or piece of cloth, rub the remaining double-sided adhesive tape off the back door panel while it is hot from the infrared
light.
NOTICE: Installing the symbol while any double-sided adhesive tape remains on the luggage compartment door panel may cause
adhesion failure. Therefore, completely remove the double-sided adhesive tape.
3. Using a non-residue solvent, clean the attachment surface.
b. Align the 2 pins and install a new symbol emblem.
NOTICE: Install the symbol emblem in an environment where the ambient temperature is over 20° C (68° F). If it is below 20° C (68 °F),
using an infrared light, heat the luggage compartment door panel and the symbol emblem up to 20 to 30° C (68 to 86° F) and install the
symbol emblem.
2. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE