Yaris L4-1.5L (1NZ-FE) (2007)
a. Engage the clip and install the anchor plate.
b. Tighten the bolt.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
c. Install the belt into the rear seat shoulder belt hanger.
44. INSTALL REAR SEAT OUTER BELT ASSEMBLY LH
HINT: Use the same procedure as for the RH side.
45. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
a. Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration.
46. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
HINT: Use the same procedure as for the RH side.