Yaris L4-1.5L (1NZ-FE) (2007)
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
2. REMOVE FRONT SEAT HEADREST ASSEMBLY
HINT: Use the same procedure for both sides.
a. Push in the lock button of the front seat headrest support and remove the front seat headrest.
3. REMOVE FRONT SEAT ASSEMBLY LH
4. REMOVE FRONT SEAT ASSEMBLY RH
HINT: Use the same procedure as for the LH side.
5. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY
a. for Fixed Seat Type:
1. Remove the rear seat cushion cover pad sub-assembly.
b. for 60/40 Split Seat Type:
1. Remove the rear seat cushion cover pad sub-assembly.
6. REMOVE REAR SEATBACK ASSEMBLY RH (for 60/ 40 Split Seat Type)
7. REMOVE REAR SEATBACK ASSEMBLY LH (for 60/ 40 Split Seat Type)
8. REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type)
9. REMOVE LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type)
10. REMOVE SPARE WHEEL COVER ASSEMBLY (for 60/ 40 Split Seat Type)
11. REMOVE LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type)