toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Interior - Park Brake Lever Boot Catches on Console|Page 4492 > < Interior - Park Brake Lever Boot Catches on Console|Page 4490
Page 3
background image

4.

Remove the upper console panel sub-assembly.

A.

Shift the shift lever into the "N" position.

B.

Disengage the five (5) clips and the claw and remove the upper console panel.

5.

Remove the console upper rear panel sub-assembly.

A.

Disengage the three (3) clips and three (3) claws.

B.

Disconnect the connector and remove the console upper rear panel.

6.

Slide the OLD boot off of the parking brake lever.

Interior - Park Brake Lever Boot Catches on Console|Page 4492 > < Interior - Park Brake Lever Boot Catches on Console|Page 4490