Yaris L4-1.5L (1NZ-FE) (2007)
/Page-434017.png)
(f)
Align the timing marks of the camshaft with the mark plates of the timing chain and install the timing chain.
HINT: Align the timing marks with the mark plates while turning the hexagonal service portion of the camshaft using a wrench.
2. INSTALL CHAIN TENSIONER SLIPPER
(a)
Install the chain tensioner slipper.
3. INSTALL CHAIN TENSIONER ASSEMBLY NO. 1
(a)
Install chain tensioner assembly No. 1 with the 2 bolts.
Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
(b) Remove the bar from chain tensioner assembly No. 1.
4. INSTALL OIL PUMP SEAL
5. INSTALL OIL PUMP ASSEMBLY
6. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING BRACKET
7. INSTALL WATER PUMP ASSEMBLY
8. INSTALL WATER PUMP PULLEY
9. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
