Yaris L4-1.5L (1NZ-FE) (2007)
NOTICE:
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover Primer G.
-
Do not apply too much Primer G.
HINT: If Primer G is applied to any areas other than those specified, wipe off the primer with a clean shop rag or piece of cloth before it
dries.
d. Apply adhesive.
Adhesive:
Toyota Genuine Windshield Glass Adhesive or the equivalent.
1. Cut the tip off the cartridge nozzle, as shown in the illustration.
HINT: After cutting off the tip, use all the adhesive within the times indicated in the table below.
2. Load the sealer gun with the cartridge.
3. Apply adhesive to the back window glass, as shown in the illustration.