Yaris L4-1.5L (1NZ-FE) (2007)
/Page-1711003.png)
1. INSTALL REAR WIPER MOTOR
a. Install the rear wiper motor with the 3 bolts.
Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)
b. Connect the connector.
2. INSTALL REAR WIPER MOTOR GROMMET
a. Install the rear wiper motor grommet.
3. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY
a. Scrape any metal powder off the serrated part of the wiper arm with a round file or the equivalent (when reinstalling).
b. Clean the wiper pivot serrations with a wire brush.
c. Operate the wiper then stop the windshield wiper motor in the automatic stop position.
