Tail Lamp Insert, Replace - Models 53, 54, 56, 57, 58, 59 (Additional to operation "Rear End Panel, Lower, Replace Completely").
Remove, Disconnect Attaching parts, drill off tail lamp insert piece.
Install, Connect Fit rear lamp insert. Prepare flanges, apply spot weld paint. Weld in new part. Seal body seams. Seal lower rear end panel cavity. Attaching parts.
(I) |
Model |
56, 57 |
(II) |
Model |
53, 54, 58, 59 |
Notice: Body Measurement Chart, note Position 31. |
|
|