Remove wiring harness plug from bracket on wheel well. Disconnect wiring harness plug from wheel speed sensor. Unclip cable from retaining clips. Lever wheel speed sensor out of bracket with screwdriver.
Install, Connect
Fit wheel speed sensor to support bracket - tightening torque 8 Nm.
Coat metal housing of wheel speed sensor with bearing grease.
Insert cable wheel speed sensor in retaining clips. Connect wheel speed sensor plug to wiring harness plug. Clip wiring harness plug into bracket on wheel well - ensure proper cable connection.
Carry out function testing - see operation " ABS function testing ".
Remove, Disconnect 
Install, Connect 
