Vauxhall Workshop Service and Repair Manuals

Fuel System, Bleed  

  Remove, Disconnect   

Loosen closure bolt (1) on fuel filter approx. two turns.   Actuate starter until fuel escapes bubble-free from closure bolt. Close off closure bolt. Collect escaping fuel.     Inspect    While actuating starter, successively loosen all injection lines on injector nozzle holder with Line Wrench KM-812 until fuel escapes from injection lines. Then re-seal fuel injection lines - tightening torque 25 Nm/18.5 lbf. ft.   Collect escaping fuel in a suitable container.