Disconnect wiring harness plug (1) for crankshaft pulse pickup. Remove cable (2) for crankshaft pulse pickup from rear toothed belt cover. Remove crankshaft pulse pickup (3) from retainer.
Install, Connect Attach crankshaft pulse pick-up to bracket - 8 Nm/6 lbf. ft. Insert crankshaft pulse pick-up cable in rear toothed belt cover. Connect wiring harness plug for crankshaft pulse pick-up - ensure that cable routing is correct.
Inspect Check gap between crankshaft pulse pickup and increment disc - see operation "Gap between Crankshaft Pulse Pickup and Increment Disc, Check". |