Special Service Tools AF 13/20 Automatic Transmission
|
KM-113-2 |
Transmission holder |
|
Transmission brackets with KM-694 or KM-910. |
|
KM-161-B |
Bearing Puller |
|
Tapered roller bearing inner race from differential with hooks -3 and thrust piece KM-403 - AF 20. |
|
KM-171 |
Remover |
|
To remove rear tapered roller bearing from planetary gear P2 with KM-528 - AF 20. |
|
KM-204 |
Installer |
|
To push roller bearing into converter housing |
|
KM-210-B |
Wheel Puller |
|
Remove tapered roller bearing outer race from transmission housing with KM-709 - AF 20. |
|
KM-263-B |
Engine bridge 1) |
|
To hold engine during various operations on transmission. |
| 
|
Special Service Tools (Continued)
|
KM-305 |
Remover/Installer Drift |
|
To remove and install various transmission bearings with KM-695 - AF 20. |
|
KM-313 |
Shaft Remover |
|
Roller bearing out of converter housing with KM-J-26941 and KM-483. |
|
KM-372-2 |
Installer 1) |
|
Press tapered roller bearing outer race in transmission housing with KM-554 and KM-710 - AF 13. |
|
KM-396 |
Ring Pliers |
|
To remove and install various snap rings. |
|
KM-403 |
Thrust piece |
|
Tapered roller bearing inner race from differential with KM-161-A - AF 20. |
|
KM-407-A |
Ring Installer |
|
Idler gear, (driven) from planetary carrier assembly with KM-701 - AF 20. |
| 
|
Special Service Tools (Continued)
|
KM-446 |
Seal Installer |
|
Drive axle shaft seal rings into transmission - AF 13. |
|
KM-460-2-B |
Remover |
|
Right axle shaft out of transmission. |
|
KM-483 |
Adapter |
|
Roller bearing out of converter housing with KM-J-26941 and KM-313. |
|
KM-498-B |
Fluid Pressure Gauge |
|
To check fluid pressure with KM-892. |
|
KM-503-A |
Remover |
|
Left axle shaft out of transmission - AF 20. |
|
KM-514 |
Installer |
|
To remove and install various bearing rings. |
| 
|
Special Service Tools (Continued)
|
KM-519 |
Seal Installer |
|
To drive in flush axle shaft seal ring - AF 20. |
|
KM-523-4 |
|
|
Press tapered roller bearing outer race for differential and friction washer in converter housing with KM-514 and KM-711-3 - AF 13. |
|
KM-528 |
Remover Ring 1) |
|
To remove rear tapered roller bearing from planetary gear P2 with KM-171 - AF 20. |
|
MKM-536-A |
Friction Coefficient Meter |
|
To measure slip torque with KM-J-28544-A. |
|
KM-554 |
Installer |
|
Press tapered roller bearing outer race for differential and spacer washer (selective) in transmission housing with KM-372-2 and KM-710 - AF 13. |
|
MKM-557-A |
Puller Set |
|
Left axle shaft seal ring from transmission. |
| 
|
Special Service Tools (Continued)
|
KM-567-2 |
Installer |
|
Tapered roller bearing inner race on differential with KM-514 - AF 13. |
|
KM-574 |
Remover/Installer |
|
To remove and install converter. |
|
KM-586 |
Remover |
|
To remove fluid pump seal ring with KM-J-7004. |
|
KM-620-2 |
Remover/Installer |
|
To compress assembly return springs for C0 and C3 with KM-J-23078-A - AF 13. |
|
KM-629-A |
Ring Installer |
|
Press roller bearing in auxiliary housing - AF 20. |
|
KM-674-A |
Installer |
|
To install fluid pump seal ring (AF 13/20) and various bearings in transmission (AF 20). |
| 
|
Special Service Tools (Continued)
|
KM-694-A |
Transmission holder |
|
Holding transmission during overhaul procedures with KM-113-2 - AF 20. |
|
KM-695 1) |
Remover/Installer |
|
To remove and install various bearings in transmission with KM-305 - AF 20. |
|
KM-696 1) |
Bracket |
|
To hold planetary gear P2 during overhaul procedures - AF 20. |
|
KM-697 1) |
Installer |
|
To install various bearing rings in transmission. |
|
KM-698 1) |
Remover/Installer |
|
To remove and install return spring of various clutches in transmission - AF 20. |
|
KM-699 1) |
Remover/Installer |
|
To remove and install spring collar of multi-disc brake - AF 20. |
1) contained in KM-715-A. | 
|
Special Service Tools (Continued)
|
KM-701 1) |
Remover Set |
|
Press drive gear out of planetary gear P2 with KM-407-A - AF 20. |
|
KM-702 1) |
Remover |
|
To remove fluid pump - AF 20. |
|
KM-703 1) |
Wrench |
|
To release the fastening nut on the planetary gear P2 - AF 20. |
|
KM-704 1) |
Checking Tool |
|
To check easy rotation of fluid pump - AF 20. |
|
KM-709 1) |
Remover |
|
Remove tapered roller bearing outer race for differential from transmission housing with KM-210-A - AF 20. |
|
KM-710 1) |
Installer |
|
Install tapered roller bearing outer race: in transmission housing with KM-372-2 and KM-554 - AF 13, with drift from KM-305 - AF 20. |
1) contained in KM-715-A. | 
|
Special Service Tools (Continued)
|
KM-711 1) |
Installation Drifts |
|
Press in tapered roller bearing outer race for differential with KM-523-4 and KM-372-2 in transmission housing - AF 13. Drive in needle bearing in transmission housing - AF 20. |
|
KM-715-A |
Tool Set |
|
To overhaul AF 20/22 transmission |
|
KM-892 |
Adapter |
|
To check fluid pressure with KM-498-B - AF 20. |
|
KM-899 |
Remover/Installer |
|
To remove and install converter. |
|
KM-910 |
Transmission holder |
|
To hold of transmissions AF 13 during overhaul procedures with KM-113-2. |
1) contained in KM-715-A. | 
|
Special Service Tools (Continued)
|
KM-923 |
Wiring harness repair tool |
|
Detach various wiring harness plugs with KM-923-22. |
|
KM-924 |
Plug |
|
Closing oil cooler lines |
|
KM-962 |
Test device |
|
Checking and adjusting the selector lever position switch. |
|
KM-962-10 |
Battery adapter cable |
|
Power supply through the removed battery to KM-962 test device |
|
KM-J-7004 |
Slide Hammer |
|
Drive out fluid pump-seal ring and, if necessary, pipe line out of transmission with KM-586. |
|
KM-J-23078-A |
Clutch Tensioner |
|
Disassembly and assembly of various clutches. With C0 and C3 with KM-620-2 - AF 13. |
| 
|
Special Service Tools (Continued)
|
KM-J-26941 |
Remover |
|
Roller bearing out of converter housing with KM-313 and KM-483. |
|
KM-J-28544-A |
Test Equipment |
|
To measure starting torque with MKM-536. |
|
MKM-883-1 |
Engine bridge |
|
Holding/lowering/lifting the engine |
|
MKM-886 |
Transmission holder |
|
To remove and install and hold transmission. |
| 
|
|
