|
Rear Quarter Panel, Partial Replacement (Models
F08, F35, F70)
The illustrated cutting lines are provided for partial
replacement. Special economy parts are planned.
Only operations deviating from the operation "Rear Quarter
Panel, Replace" are described.
 Remove
Attaching parts. Detach rear quarter panel.
|
1 =
|
Partial Replacement – Front, Model F08
|
|
2 =
|
Partial Replacement – Rear, Model F08
|
|
3 =
|
Partial Replacement – Front, Model F35
|
|
4 =
|
Partial Replacement – Rear, Model F35
|
|
|
|
The illustrated cutting lines are provided for partial
replacement. Special economy parts are planned.
Only operations deviating from the operation "Rear Quarter
Panel, Replace" are described.
Remove
Attaching parts. Detach rear quarter
panel.
|
5 =
|
Partial Replacement – Front, Model F70
|
|
6 =
|
Partial Replacement – Rear, Model F70
|
|
|
Install
Fit replacement section of rear quarter panel – approx. 10
mm/0.4 in. allowed for overlap.
Step flange on body or new parts as required.
Weld in rear quarter panel on overlapping plug spot welding
point.
|
1)
|
Installation – Model F08
|
|
2)
|
Installation – Model F08
|
|
3)
|
Installation – Model F35
|
|
4)
|
Installation – Model F35
|
|
|
Note: To avoid
scratching at the edge, sand on a 30° chamfer.
Seal body seams. Seal cavities. Attaching parts.
Install
Fit replacement section of rear quarter panel – approx. 10
mm/0.4 in. allowed for overlap.
Step flange on body or new part as desired.
Weld in rear quarter panel on overlapping plug spot welding
point.
|
5)
|
Installation – Model F70
|
|
6)
|
Installation – Model F70
|
|
|
Note: To avoid
scratching at the edge, sand on a 30° chamfer.
Seal body seams. Seal cavities. Attaching parts.
|
