Airbag Unit - Passenger's Side, Remove and
Install
Caution
Disconnect battery and wait 1 minute until the capacitor has
discharged.
Remove
Glove compartment – see operation "Glove Compartment,
Remove and Install".
Release and remove airbag unit.
Detach and separate airbag unit wiring harness plug.
Caution
Always set aside airbag unit with screw connection side
downwards.
|
|
Install
Wiring harness plug to airbag unit, position airbag unit in
detent (1). Passenger's side airbag unit to steering crossmember
– tightening torque 5 Nm / 3.7 lbf. ft. Glove compartment,
connect battery.
|
|
|