|
Front Seat Belt, Remove and Install (Models F08,
F07)
 Remove
Remove belt guide rail (2).
|
Remove inner panelling for front rear quarter panel – see
operation " Inner Panelling – Rear Quarter Panel, Front,
Remove and Install (Models F08, F07)". Remove inner panelling of
upper B-pillar – see operation " Inner Panelling –
Upper B-Pillar, Remove and Install (Model F08)" or "Inner Panelling
– Upper B-pillar, Remove and Install (Model F07)".
Remove seat belt upper mounting (1) and height adjuster (5).
Remove belt guide (4).
Remove rear sill inner panelling – see operation "Inner
Panelling – Rear Sill, Remove and Install" (Models F08, F07).
Remove retractor (3).
|
|
Install
Install reel retractor, sill inner panelling, belt guide, height
adjuster, seat belt upper mounting, upper B-pillar inner panelling,
rear quarter panel front inner panelling, belt guide rail.
Caution
Screws for reel retractor, seat belt and belt rail must be
fitted with screw locking compound.
Torque
Inertia reel retractor to B-pillar – 35 Nm / 26 lbf.
ft.
Height adjuster to B-pillar – 20 Nm / 15 lbf. ft.
Seat belt to height adjuster – 35 Nm /26 lbf. ft.
Belt rail to underbody – 35 Nm / 26 lbf. ft.
Caution
Only for vehicles with seat belt load limiter: the inertia reel
retractors must be replaced after every accident in which the seat
belt tensioner was triggered.
|
