|
Front Guide with Catch Lever, Remove and Install
– Rockwell (Models F08, F35, F48, F69, F70)
 Remove
|
Control unit – see operation "Control Unit, Remove and
Install (Models F08, F35, F48, F69, F70)". Drive water gutter
– see operation "Crank Drive, Remove and Install (Models F08,
F35, F48, F69, F70)" or "Electric Drive, Remove and Install (Models
F08, F35, F48, F69, F70)". Pull side guide and rear guide with
actuating cable out of guide rail. Front guide with catch lever
from side guide – retaining clip (2) and connecting pin
(3).
Install
|
|
|
Attach front guide with detent lever to side guide. Push side
guide and rear guide with actuation cable into the guide rail.
|
|
 Adjust
Adjust both actuation cables – see operation "Both
Actuation Cables, Basic Adjustment (Models F08, F35, F48, F69,
F70)". Adjust drive – see operation "Crank Drive, Adjust
(Models F08, F35, F48, F69, F70)".
Install
Install gutter, drive, actuation unit.
|
