|
Rear Guide with Actuation Cable, Remove and
Install – Rockwell (Models F08, F35, F48, F69, F70)
 Remove
|
Control unit – see operation "Control Unit, Remove and
Install (Models F08, F35, F48, F69, F70)". Drive water gutter
– see operation "Crank Drive, Remove and Install (Models F08,
F35, F48, F69, F70)" or "Electric Drive, Remove and Install (Models
F08, F35, F48, F69, F70)". Remove side guide and rear guide with
actuating cable. Lever off lock washer (4). Remove connecting pin
(3). Remove rear guide with actuation cable (2) from side
guide.
Caution
|
|
|
Always replace actuation cables in pairs!
|
|
Install
|
Install rear guide with actuation cable side guide. Insert side
guide and rear guide with actuation cable into guide rail.
 Adjust
Basic adjustment of both actuation cables – see operation
"Both Actuation Cables, Basic Adjustment (Models F08, F35, F48,
F69, F70)". Adjust drive – see operation "Crank Drive, Adjust
(Models F08, F35, F48, F69, F70)".
Install
Install gutter, drive, actuation unit.
|
|
|
