|
Control Unit, Remove and Install (Models F08, F35,
F48, F69, F70)
 Remove
|
Glass cover – see operation "Glass Cover, Remove and
Install (Models F08, F35, F48, F69, F70)". Moulded headlining
– see operation "Moulded Headlining, Remove and Install
(Models F08, F35, F48, F69)". Disconnect water drain hoses.
Control Unit
Note: For removal and
installation of the control unit a second mechanic is required.
|
|
|
Install
Control Unit
Note: If a new
actuation unit is installed, the transport holders must removed
prior to installation of the drive.
|
|
Torque
|
Actuation unit to roof frame – 4 Nm / 3 lbf. ft.
Install
Install water drain hoses, glass cover.
Inspect
Carry out function check.
Install
Moulded headlining
|
|
|
