|
Flywheel, Remove and Install
 Remove
|
Remove transmission and clutch thrust plate – see
operation "Transmission, Remove and Install (F13/F17/F18)" and
"Thrust Plate and Clutch Disc, Remove and Install" in group
"K".
Counterhold flywheel with KM-652 (1) and remove from
crankshaft.
|
|
Re-cut thread in crankshaft.
Install
Attach flywheel to crankshaft with new bolts – tightening
torque 35 Nm / 26 lbf. ft. + 30° + 15°. Lock flywheel when
tightening with KM-652 (2).
Install transmission and clutch thrust plate – see
operation "Transmission, Remove and Install (F13/F17/F18)" and
"Thrust Plate and Clutch Disc, Remove and Install" in group
"K".
|
