|
Spark Plugs, Remove and Install
 Remove
| 1. |
Remove wiring harness plug (3)
|
| 2. |
Detach ignition module cover (1)
| • |
Pull off in the direction of the arrow
|
|
| 3. |
Remove ignition module
| • |
Remove fastening bolts (5)
|
| • |
Detach ignition module (4) from spark plugs with KM-6009 (2)
Note: do not tilt, as
otherwise the spark plug connectors can be damaged
|
|
|
|
Install
| 5. |
Install spark plugs in cylinder head
| • |
Tightening torque 25 Nm
|
|
| 6. |
Connect ignition module to spark plugs and attach to cylinder
head
|
| 7. |
Connect wiring harness plug to ignition module.
|
| 8. |
Attach ignition module cover to cylinder head cover.
|
|
