Astra G
Holding screw on the camshaft sensor - Loosening
Models: Corsa-B 93.5-99, Tigra 95-99, Astra-F 92-98, Vectra-B 96-98, Astra-G 98-99, Zafira 99
Engines: 1.4 l, 1.6 l
Option: X14XE, X16XE, X16XEL,C16XE
Group: J - Engine
Troublecode: Non
Complaint: Loose or Comes off Loosening of the holding screw on the camshaft sensor.
Cause: Holding screw is too short and the tightening torque used is too low.
Production Solution: From engine-No. 20G98790 (Szengotthard) and 02JZ9679 (Bochum) the improvement (glued 18 mm Torx screw) is introduced inproduction.
Special part: No
Remedy: Use the Torx screw (18 mm) with compound. Tightening torque:8 Nm + /- 1 Nm.
Note: Also pay attention to Field Remedy 1230.
Cat /Part-No.: Torx screw 20 05 103 /(11 095 421) Compound 15 10 181 /(90 542 117)
|