Ignition Module, Remove and Install
Remove
Disconnect wiring harness plug (3) from ignition module.
Detach ignition module cover (1) in direction of arrow.
Remove fastening bolts (5) and disconnect ignition module (4)
from spark plugs using KM-6009 (2) – do not tilt as otherwise
the spark plug connector can be damaged.
|
|
Install
Connect ignition module to spark plugs and attach to cylinder
head – tightening torque 8 Nm / 6 lbf. ft.
Connect wiring harness plug to ignition module.
Attach ignition module cover to cylinder head cover.
|