|
Intake air temperature sensor, Remove and Install
(X 14 XE, Z 14 XE, X 16 XEL, Z 16 XE, Z 16 YNG)
 Remove
|
Disconnect wiring harness plug (1) from intake air temperature
sensor (2).
Carefully withdraw intake air temperature sensor (2) from rubber
ring (3).
Remove rubber ring from air intake manifold – do not
damage attaching parts.
|
|
Install
Place rubber ring on intake air temperature sensor – note
installation position.
Install intake air temperature sensor with rubber ring in air
guide tube – ensure correct seating.
Connect wiring harness plug to intake air temperature
sensor.
|
