|
Illustration (Z 16 SE)
| 1. |
Air cleaner housing, lower part |
| 2. |
Air cleaner housing, upper part |
| 3. |
Air intake hose |
| 4. |
Engine vent hose |
| 5. |
Air intake manifold resonator |
| 6. |
Air intake hose |
|
|
Note: Any possible
contamination (grease, oil, etc.) must be cleaned from hoses and
connections prior to assembly.
Strict observance of a tightening torque of 3.5 Nm / 2.6 lbf.
ft. must be ensured when tightening the hose clamps.
Caution
Only if the hose clamps are correctly tightened to the specified
tightening torque, can sealing of the intake system and thereby
operational safety be ensured.
|
