Cruise Control Bowden Cable, Remove and
Install
Remove
Lift retainer for accelerator Bowden cable (1) with screwdriver
(in direction of arrow) and remove ball socket for accelerator
Bowden cable (2) from ball head (arrow).
Prise off retainer ring for cruise control Bowden cable (3) with
screwdriver (in direction of arrow) and remove shackle for cruise
control Bowden cable (in direction of arrow) from ball head.
|
|
Compress pin for cruise control Bowden cable (arrows) and remove
from Bowden cable bracket.
|
|
Detach cruise control Bowden cable from control unit / actuator
with a 1/4 turn to the left of guide tube.
|
|
Detach cruise control Bowden cable on actuator (arrow) and
remove.
|
|
Install
Attach cruise control Bowden cable to actuator, insert into
guide tube and screw onto control unit / actuator with a 1/4 turn
to the right of guide tube.
Allow cruise control Bowden cable to engage into Bowden cable
bracket.
Attach shackle for cruise control Bowden cable to ball head and
secure retainer ring.
Connect ball socket for accelerator Bowden cable to ball head
– ensure that retainer engages.
|